Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Introduction
1-10
System Defaults
The following table lists some of the wireless bridge’s basic
system defaults. To reset the bridge defaults, use the CLI
command “reset configuration” from the Exec level prompt.
Feature Parameter Default
Identification System Name Dual Band Outdoor
AP
Administration User Name admin
Password smcadmin
General HTTP Server Enabled
HTTP Server Port 80
TCP/IP IP Address DHCP
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS IP 0.0.0.0
Secondary DNS IP 0.0.0.0
VLANs Status Disabled
Native VLAN ID 1
Filter Control Ethernet Type Disabled
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 321 322

Comentarios a estos manuales

Sin comentarios