Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 263

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 262
Ethernet Interface Commands
7-93
Related Commands
show interface ethernet (page 7-96)
ip address
This command sets the IP address for the (10/100Base-TX)
Ethernet interface. Use the no form to restore the default IP
address.
Syntax
ip address <ip-address> <netmask> <gateway>
no ip address
ip-address - IP address
netmask - Network mask for the associated IP subnet. This
mask identifies the host address bits used for routing to
specific subnets.
gateway - IP address of the default gateway
Default Setting
IP address: 192.168.2.2
Netmask: 255.255.255.0
Command Mode
Interface Configuration (Ethernet)
Command Usage
DHCP is enabled by default. To manually configure a new
IP address, you must first disable the DHCP client with the
no ip dhcp command.
Vista de pagina 262
1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 321 322

Comentarios a estos manuales

Sin comentarios