Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 199

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 198
System Clock Commands
7-29
sntp-server ip
This command sets the IP address of the servers to which SNTP
time requests are issued. Use the this command with no
arguments to clear all time servers from the current list.
Syntax
sntp-server ip <1 | 2> <ip>
1 - First time server.
2 - Second time server.
ip - IP address of an time server (NTP or SNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp-server
enable command, the sntp-server ip command specifies the
time servers from which the wireless bridge polls for time
updates. The wireless bridge will poll the time servers in the
order specified until a response is received.
Example
Related Commands
sntp-server enable (page 7-30)
show sntp (page 7-33)
AP(config)#sntp-server ip 10.1.0.19
AP#
Vista de pagina 198
1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 321 322

Comentarios a estos manuales

Sin comentarios