Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario descargar pdf (Pagina 153)

Radio Interface

6-77

four settings without having to update the client keys.

Note: Key index and type must match that configured on the clients.

The configuration settings for WEP are summarized below:

CLI Commands for static WEP Shared Key Security – From the

802.11a or 802.11g interface configuration mode, use the

authentication command to enable WEP shared-key

authentication and the encryption command to enable WEP

encryption. Use the multicast-cipher command to select WEP

cipher type. To enter WEP keys, use the key command, and then

set one key as the transmit key using the transmit-key

command. Then disable 802.1X port authentication with the no

802.1X command. To view the current security settings, use the

WEP only WEP over 802.1X

Authentication Type: Shared Key

WEP (encryption): Enable

WPA clients only: Disable

Multicast Cipher: WEP

Shared Key: 64/128/152

Key Type -

Hex: 10/26/32 characters

ASCII: 5/13/16 characters

Transmit Key: 1/2/3/4 (set index)

802.1X = Disabled

MAC Authentication: Any setting

Authentication Type: Open System

WEP (encryption): Enable

WPA clients only: Disable

Multicast Cipher: WEP

Shared Key: 64/128

802.1X = Required

MAC Authentication: Disabled/

Local

1: See Authentication (page 6-16)

2: See Radius (page 6-10)

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 321 322

Sin comentarios

Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 153