Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 204

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 203
Command Line Interface
7-34
SNMP Commands
Controls access to this wireless bridge from management
stations using the Simple Network Management Protocol
(SNMP), as well as the hosts that will receive trap messages.
snmp-server community
This command defines the community access string for the
Simple Network Management Protocol. Use the no form to
remove the specified community string.
Syntax
snmp-server community string [ro | rw]
no snmp-server community string
string - Community string that acts like a password and
permits access to the SNMP protocol. (Maximum length: 23
characters, case sensitive)
ro - Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Command Function Mode Page
snmp-server
community
Sets up the community access string
to permit access to SNMP commands
GC 7-34
snmp-server
contact
Sets the system contact string GC 7-35
snmp-server
enable server
Enables SNMP service and traps GC 7-36
snmp-server host Specifies the recipient of an SNMP
notification operation
GC 7-37
snmp-server
location
Sets the system location string GC 7-38
show snmp Displays the status of SNMP
communications
Exec 7-39
Vista de pagina 203
1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 321 322

Comentarios a estos manuales

Sin comentarios