Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario descargar pdf (Pagina 241)

100

101

Bridge Commands

7-71

Command Usage

Bridge priority is used in selecting the root device, root port,

and designated port. The device with the highest priority

becomes the STP root device. However, if all devices have the

same priority, the device with the lowest MAC address will then

become the root device.

Example

bridge stp-port path-cost

Use this command to configure the spanning tree path cost for

the specified port. Use the no form to restore the default for the

specified port.

Syntax

bridge stp-port path-cost <port> cost

no bridge stp-port path-cost <port>

• port - Specifies the port number on the wireless bridge.

(Range: 0, Ethernet interface; 1-16 wireless interface)

• cost - The path cost for the port. (Range: 1-65535)

Default Setting

Ethernet interface – 19

Wireless interface – 40

Command Mode

Global Configuration

AP(config)#bridge stp-bridge priority 40000

AP(config)#

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 321 322

Comentarios a estos manuales

Sin comentarios

Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 241

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Smc-networks ElliteConnect 2.4GHz/5GHz