Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 131
- Pagina / 322
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Advanced Configuration
6-55
RSSI – The RSSI value for a selected port can be displayed and
a representative voltage output can be enabled.
• Output Activate: Enables or disables the RSSI voltage output
on the external RSSI connector. (Default: Enabled)
• Port Number: Selects a specific WDS port for which to set the
maximum RSSI output voltage level. Ports 1-16 are available
for a Master unit, only port 1 for a Slave unit. (Default: 1)
• Output Value: The maximum RSSI voltage level for the current
selected WDS port. A value of zero indicates that there is no
received signal or that the WDS port is disabled.
Distance – This value is used to adjust timeout values to take into
account transmit delays due to link distances in the wireless
bridge network. For a point-to-point link, specify the approximate
distance between the two bridges. For a point-to-multipoint
network, specify the distance of the Slave bridge farthest from the
Master bridge
• Mode: Indicates if the 802.11a radio is operating in normal or
Turbo mode. (See "Radio Settings A" on page 6-57.)
• Distance: The approximate distance between antennas in a
bridge link.
Note: There are currently no equivalent CLI commands for the RSSI
controls.
- EliteConnect 1
- Universal 1
- Outdoor Access Point/Bridge 1
- Copyright 2
- LIMITED WARRANTY 3
- EC Conformance Declaration 6
- Community 9
- COMPLIANCES 10
- Safety Compliance 10
- OMPLIANCES 11
- (Germany): 13
- Chapter 1 23
- Introduction 23
- Package Checklist 24
- Hardware Description 26
- Integrated High-Gain Antenna 27
- External Antenna Options 27
- Ethernet Port 27
- Input Output 28
- Features and Benefits 31
- System Defaults 32
- Chapter 2 37
- Network Configuration 37
- Access Point Topologies 39
- Infrastructure Wireless LAN 39
- Bridge Link Topologies 41
- Chapter 3 45
- Bridge Link Planning 45
- Radio Path Planning 47
- Antenna Height 47
- Radio Interference 50
- Weather Conditions 51
- Ethernet Cabling 52
- Grounding 52
- Chapter 4 53
- Hardware Installation 53
- Testing Basic Link Operation 54
- Mount the Unit 54
- Connect External Antennas 57
- Connect Cables to the Unit 59
- Connect the Power Injector 59
- Align Antennas 61
- Chapter 5 65
- Initial Configuration 65
- Initial Setup through the CLI 66
- Setup Wizard 68
- Chapter 6 77
- System Identification 80
- TCP / IP Settings 83
- PPPoE Settings 89
- System Configuration 100
- Advanced Configuration 101
- Filter Control 102
- Administration 109
- System Log 114
- Spanning Tree Protocol (STP) 123
- Radio Interface 132
- Radio Settings A (802.11a) 133
- Radio Settings G (802.11g) 139
- Security (Bridge Mode) 142
- Security (Access Point Mode) 148
- Status Information 163
- Station Status 166
- Event Logs 168
- Chapter 7 171
- Command Line Interface 171
- Entering Commands 173
- Getting Help on Commands 174
- Partial Keyword Lookup 175
- Using Command History 175
- Understanding Command Modes 176
- Exec Commands 176
- Configuration Commands 177
- Command Line Processing 178
- Command Groups 179
- General Commands 180
- System Management Commands 185
- System Logging Commands 193
- System Clock Commands 198
- SNMP Commands 204
- Flash/File Commands 209
- RADIUS Client 215
- Authentication 219
- 802.1x session-timeout 224
- 802.1x supplicant 225
- WDS Commands 231
- Bridge Commands 235
- Filtering Commands 246
- PPPoE Commands 250
- Ethernet Interface Commands 261
- Wireless Interface Commands 267
- IAPP Commands 292
- VLAN Commands 293
- Appendix A 297
- Troubleshooting 297
- Appendix B 299
- Specifications 299
- General Specifications 301
- Antenna Specifications 302
- Appendix C 305
- Cables and Pinouts 305
- 10/100BASE-TX Pin Assignments 306
- Straight-Through Wiring 307
- Crossover Wiring 307
- 8-Pin DIN Connector Pinout 308
- Glossary 311
- Glossary-2 312
- Glossary-3 313
- Glossary-4 314
- Glossary-5 315
- Glossary-6 316
- SMC2888W-S 322
- SMC2888W-M 322
Relacionado con productos y manuales para Hardware Smc-networks ElliteConnect 2.4GHz/5GHz
Hardware Smc-networks ProSoft 1560 Manual de usuario
(44 paginas)
(44 paginas)
Hardware Smc-networks 10/100 Mbps Manual de usuario
(54 paginas)
(54 paginas)
Hardware Smc-networks 5MC2671W Manual de usuario
(76 paginas)
(76 paginas)
Hardware Smc-networks SMC8002CM-US Manual de usuario
(19 paginas)
(19 paginas)
Hardware Smc-networks SMCWEBT-G Manual de usuario
(66 paginas)
(66 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales