Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario descargar pdf (Pagina 118)

System Configuration

6-42

CLI Commands for SNTP – To enable SNTP support on the

wireless bridge, from the global configuration mode specify SNTP

server IP addresses using the sntp-server ip command, then

use the sntp-server enable command to enable the service. Use

the sntp-server timezone command to set the location time

zone and the sntp-server daylight-saving command to set up a

daylight saving. To view the current SNTP settings, use the show

sntp command.

CLI Commands for the System Clock – The following example

shows how to manually set the system time when SNTP server

support is disabled on the wireless bridge.

AP(config)#sntp-server ip 10.1.0.19 7-29

AP(config)#sntp-server enable 7-30

AP(config)#sntp-server timezone +8 7-32

AP(config)#sntp-server daylight-saving 7-31

Enter Daylight saving from which month<1-12>: 3

and which day<1-31>: 31

Enter Daylight saving end to which month<1-12>: 10

and which day<1-31>: 31

AP(config)#exit

AP#show sntp 7-33

SNTP Information

=========================================================

Service State : Enabled

SNTP (server 1) IP : 137.92.140.80

SNTP (server 2) IP : 192.43.244.18

Current Time : 19 : 35, Oct 10th, 2003

Time Zone : +8 (TAIPEI, BEIJING)

Daylight Saving : Enabled, from Mar, 31th to Oct, 31th

=========================================================

AP#

AP(config)#no sntp-server enable 7-30

AP(config)#sntp-server date-time 7-31

Enter Year<1970-2100>: 2003

Enter Month<1-12>: 10

Enter Day<1-31>: 10

Enter Hour<0-23>: 18

Enter Min<0-59>: 35

AP(config)#

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 321 322

Sin comentarios

Smc-networks ElliteConnect 2.4GHz/5GHz Manual de usuario Pagina 118