Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 97

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 96
C
ONSOLE
P
ORT
S
ETTINGS
4-23
device connected to the serial port. (Range: 9600, 19200, 38400, 57600,
or 115200 baud, Auto; Default: Auto)
Stop Bits – Sets the number of the stop bits transmitted per byte.
(Range:1-2;Default: 1 stop bit)
Password
1
– Specifies a password for the line connection. When a
connection is started on a line with password protection, the system
prompts for the password. If you enter the correct password, the system
shows a prompt. (Default: No password)
Login
1
– Enables password checking at login. You can select
authentication by a single global password as configured for the
Password parameter, or by passwords set up for specific user-name
accounts. (Default: Local)
Web – Click System, Line, Console. Specify the console port connection
parameters as required, then click Apply.
Figure 4-14 Configuring the Console Port
1. CLI only.
Vista de pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 747 748

Comentarios a estos manuales

Sin comentarios