Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 291

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 290
L
AYER
2 Q
UEUE
S
ETTINGS
13-3
CLI – This example assigns a default priority of 5 to port 3.
Mapping CoS Values to Egress Queues
This switch processes Class of Service (CoS) priority tagged traffic by
using eight priority queues for each port, with service schedules based on
strict or Weighted Round Robin (WRR). Up to eight separate traffic
priorities are defined in IEEE 802.1p. The default priority levels are
assigned according to recommendations in the IEEE 802.1p standard as
shown in the following table.
Console(config)#interface ethernet 1/3 24-2
Console(config-if)#switchport priority default 5 31-4
Console(config-if)#end
Console#show interfaces switchport ethernet 1/3 24-16
Information of Eth 1/3
Broadcast threshold: Enabled, 500 packets/second
LACP status: Disabled
Ingress rate limit: Disable, 1000M bits per second
Egress rate limit: Disable, 1000M bits per second
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 5
GVRP status: Disabled
Allowed VLAN: 1(u),
Forbidden VLAN:
Console#
Table 13-1 Mapping CoS Values to Egress Queues
Priority 01234567
Queue 20134567
Vista de pagina 290
1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 747 748

Comentarios a estos manuales

Sin comentarios