Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 217

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 216
C
ONFIGURING
R
ATE
L
IMITS
9-27
Command Attribute
Rate Limit – Sets the output rate limit for an interface.
Default Status – Disabled
Default Rate – Fast Ethernet: 100 Mbps; Gigabit Ethernet: 1000 Mbps
Range – Fast Ethernet: 1 - 1000 Mbps; Gigabit Ethernet: 1 - 1000 Mbps
Web - Click Port, Rate Limit, Input/Output Port/Trunk Configuration.
Set the Input Rate Limit Status or Output Rate Limit Status, then set the
rate limit for the individual interfaces, and click Apply.
Figure 9-11 Rate Limit Configuration
CLI - This example sets the rate limit for input and output traffic passing
through port 1 to 60 Mbps.
Console(config)#interface ethernet 1/1 24-2
Console(config-if)#rate-limit input 60 27-2
Console(config-if)#rate-limit output 60
Console(config-if)#
Vista de pagina 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 747 748

Comentarios a estos manuales

Sin comentarios