Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 573

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 572
26-1
C
HAPTER
26
M
IRROR
P
ORT
C
OMMANDS
This section describes how to mirror traffic from a source port to a target
port.
port monitor
This command configures a mirror session. Use the no form to clear a
mirror session.
Syntax
port monitor interface [rx | tx | both]
no port monitor interface
interface - ethernet unit/port (source port)
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
rx - Mirror received packets.
tx - Mirror transmitted packets.
both - Mirror both received and transmitted packets.
Default Setting
No mirror session is defined. When enabled, the default mirroring is
for both received and transmitted packets.
Command Mode
Interface Configuration (Ethernet, destination port)
Table 26-1 Mirror Port Commands
Command Function Mode Page
port monitor Configures a mirror session IC 26-1
show port monitor Shows the configuration for a mirror port PE 26-2
Vista de pagina 572
1 2 ... 568 569 570 571 572 573 574 575 576 577 578 ... 747 748

Comentarios a estos manuales

Sin comentarios