Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 624

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 623
VLAN C
OMMANDS
30-8
vlan
This command configures a VLAN. Use the no form to restore the default
settings or delete a VLAN.
Syntax
vlan vlan-id [name vlan-name] media ethernet
[state {active | suspend}]
no vlan vlan-id [name | state]
vlan-id - ID of configured VLAN. (Range: 1-4093, no leading
zeroes)
name - Keyword to be followed by the VLAN name.
- vlan-name - ASCII string from 1 to 32 characters.
media ethernet - Ethernet media type.
state - Keyword to be followed by the VLAN state.
- active - VLAN is operational.
- suspend - VLAN is suspended. Suspended VLANs do not pass
packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
no vlan vlan-id deletes the VLAN.
no vlan vlan-id name removes the VLAN name.
no vlan vlan-id state returns the VLAN to the default state
(i.e., active).
You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name
RD5. The VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Vista de pagina 623
1 2 ... 619 620 621 622 623 624 625 626 627 628 629 ... 747 748

Comentarios a estos manuales

Sin comentarios