Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 697

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 696
M
ULTICAST
VLAN R
EGISTRATION
C
OMMANDS
33-19
page 33-2). Note that only IGMP version 2 or 3 hosts can issue
multicast join or leave messages.
Example
The following configures one source port and several receiver ports on the
switch, enables immediate leave on one of the receiver ports, and statically
assigns a multicast group to another receiver port:
show mvr
This command shows information about the global MVR configuration
settings when entered without any keywords, the interfaces attached to the
MVR VLAN using the interface keyword, or the multicast groups
assigned to the MVR VLAN using the members keyword.
Syntax
show mvr [interface [interface] | members [ip-address]]
interface
ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-32)
ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Default Setting
Displays global configuration settings for MVR when no keywords are
used.
Console(config)#interface ethernet 1/5
Console(config-if)#mvr type source
Console(config-if)#exit
Console(config)#interface ethernet 1/6
Console(config-if)#mvr type receiver
Console(config-if)#mvr immediate
Console(config-if)#exit
Console(config)#interface ethernet 1/7
Console(config-if)#mvr type receiver
Console(config-if)#mvr group 225.0.0.5
Console(config-if)#
Vista de pagina 696
1 2 ... 692 693 694 695 696 697 698 699 700 701 702 ... 747 748

Comentarios a estos manuales

Sin comentarios