Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 282

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 281
VLAN C
ONFIGURATION
12-24
Web – Click VLAN, 802.1Q VLAN, Port Configuration or Trunk
Configuration. Set the mode for the tunnel port to Dot1q-Tunnel, and set
the TPID if the client is using a non-standard ethertype to identify 802.1Q
tagged frames, then click Apply.
Figure 12-8 Tunnel Port Configuration
CLI – This example sets port 2 to tunnel mode, indicates that the TPID
used for 802.1Q tagged frames will be 9100 hexadecimal, and enables
address monitor mode to pass traffic between the management VLANs
and the tunnel port.
Console(config)#interface ethernet 1/2 24-2
Console(config-if)#switchport mode dot1q-tunnel 30-25
Console(config-if)#switchport dot1q-ethertype 9100 30-27
Console(config-if)#
Console#show dot1q-tunnel 30-26
Dot1q-Tunnel Port List
--------
eth 1/2
Total 1 Dot1q-Tunnel Ports, 0 Dot1q-Tunnel Port-Channel
Console#
Vista de pagina 281
1 2 ... 277 278 279 280 281 282 283 284 285 286 287 ... 747 748

Comentarios a estos manuales

Sin comentarios