Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 116

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 115
S
IMPLE
N
ETWORK
M
ANAGEMENT
P
ROTOCOL
5-4
Enabling the SNMP Agent
Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).
Command Attributes
SNMP Agent Status – Enables SNMP on the switch.
Web – Click SNMP, Agent Status. Enable the SNMP Agent by marking
the Enabled checkbox, and click Apply.
Figure 5-1 Enabling the SNMP Agent
CLI – The following example enables SNMP on the switch.
Setting Community Access Strings
You may configure up to five community strings authorized for
management access by clients using SNMP v1 and v2c. All community
strings used for IP Trap Managers should be listed in this table. For
security reasons, you should consider removing the default strings.
Command Attributes
SNMP Community Capability – The switch supports up to five
community strings.
Current – Displays a list of the community strings currently configured.
Console(config)#snmp-server 20-2
Console(config)#
Vista de pagina 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 747 748

Comentarios a estos manuales

Sin comentarios