Smc-networks SMC TigerAccess SMC7824M/FSW Manual de usuario Pagina 682

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 748
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 681
M
ULTICAST
F
ILTERING
C
OMMANDS
33-4
ip igmp snooping version
This command configures the IGMP snooping version. Use the no form
to restore the default.
Syntax
ip igmp snooping version {1 | 2 | 3}
no ip igmp snooping version
1 - IGMP Version 1
2 - IGMP Version 2
3 - IGMP Version 3
Default Setting
IGMP Version 2
Command Mode
Global Configuration
Command Usage
All systems on the subnet must support the same version. If there are
legacy devices in your network that only support Version 1, you will
also have to configure this switch to use Version 1.
Some commands are only enabled for IGMPv2 and v3 snooping,
including ip igmp snooping query-max-response-time, ip igmp
snooping query-interval, and ip igmp snooping
immediate-leave.
Example
The following configures the switch to use IGMP Version 1:
Console(config)#ip igmp snooping version 1
Console(config)#
Vista de pagina 681
1 2 ... 677 678 679 680 681 682 683 684 685 686 687 ... 747 748

Comentarios a estos manuales

Sin comentarios