Smc-networks TIGERSWITCH 10/100 Manual de usuario descargar pdf (Pagina 50)

ONFIGURING

THE

WITCH

2-18

Command Attributes

• Authentication – Select the authentication, or authentication

sequence required:

- Radius – User authentication is performed using a RADIUS

server only.

- Local – User authentication is performed only locally by the

switch.

- Radius, Local – User authentication is attempted first using a

RADIUS server, then locally by the switch.

- Local, Radius – User authentication is first attempted locally

by the switch, then using a RADIUS server.

• Server IP Address – Address of authentication server.

(Default: 10.1.0.1)

• Server Port Number – Network (UDP) port of authentication

server used for authentication messages. (Range: 1-65535;

Default: 1812)

• Secret Text String – Encryption key used to authenticate

logon access for client. Do not use blank spaces in the string.

(Maximum length: 20 characters)

• Number of Server Transmits – Number of times the switch

will try to authenticate logon access via the authentication

server. (Range: 1-30; Default: 2)

• Timeout for a reply – The number of seconds the switch waits

for a reply from the RADIUS server before it resends the

request. (Range: 1-65535; Default: 5)

Note: The local switch user database has to be set up by manually

entering user names and passwords using the CLI.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 317 318

Sin comentarios

Smc-networks TIGERSWITCH 10/100 Manual de usuario Pagina 50