Smc-networks TIGERSWITCH 10/100 Manual de usuario descargar pdf (Pagina 163)

LASH

ILE

OMMANDS

3-21

Command Usage

• The system prompts for data required to complete the copy

command.

• The destination file name should not contain slashes (\ or /),

the leading letter of the file name should not be a period (.),

and the maximum length for file names on the TFTP server is

127 characters or 31 characters for files on the switch. (Valid

characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

• Due to the size limit of the Flash memory, the switch supports

only one operation code file.

• The maximum number of user-defined configuration files

depends on available memory.

• You can use “Factory_Default_Config.cfg” as the source to

copy from the factory default configuration file, but you cannot

use it as the destination.

• To replace the startup configuration, you must use

startup-config as the destination.

• The Boot ROM image cannot be uploaded or downloaded from

the TFTP server. You must use a direct console connection and

access the download menu during a boot up to download the

Boot ROM (or diagnostic) image. See “Upgrading Firmware via

the Serial Port” on page B-1 for more details.

Example

The following example shows how to upload the configuration

settings to a file on the TFTP server:

Console#copy file tftp

Choose file type:

1. config: 2. opcode: <1-2>: 1

Source file name: startup

TFTP server ip address: 10.1.0.99

Destination file name: startup.01

TFTP completed.

Success.

Console#

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 317 318

Sin comentarios

Smc-networks TIGERSWITCH 10/100 Manual de usuario Pagina 163