Smc-networks TIGERSWITCH 10/100 Manual de usuario Pagina 17
- Pagina / 318
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
C
ONNECTING
TO
THE
S
WITCH
1-3
• RADIUS client support
• MAC filtering security
Required Connections
The switch provides an RS-232 serial port that enables a
connection to a PC or terminal for monitoring and configuring the
switch. A null-modem console cable is provided with the switch.
Attach a VT100-compatible terminal, or a PC running a terminal
emulation program to the switch. You can use the console cable
provided with this package, or use a null-modem cable that
complies with the wiring assignments shown in Appendix B.
To connect a terminal to the console port, complete the following
steps:
1. Connect the console cable to the serial port on a terminal, or a
PC running terminal emulation software, and tighten the
captive retaining screws on the DB-9 connector.
2. Connect the other end of the cable to the RS-232 serial port on
the switch.
3. Make sure the terminal emulation software is set as follows:
• Select the appropriate serial port (COM port 1,
or COM port 2).
• Set the data rate to 9600 baud.
• Set the data format to 8 data bits, 1 stop bit, and no parity.
• Set flow control to none.
• Set the emulation mode to VT100.
• When using HyperTerminal, select Terminal keys, not
Windows keys.
- TigerSwitch 10/100 1
- Management Guide 3
- ANAGEMENT 15
- ONNECTING 17
- Remote Connections 18
- Basic Configuration 19
- Setting Passwords 20
- Setting an IP Address 21
- Saving Configuration Settings 26
- Managing System Files 27
- System Defaults 28
- AVIGATING 35
- Panel Display 36
- Main Menu 37
- Setting the IP Address 43
- Manual Configuration 45
- Using DHCP/BOOTP 45
- Managing Firmware 52
- Resetting the System 56
- (Global Setting) 59
- Enabling or Disabling GVRP 59
- Versions 60
- ISPLAYING 61
- Port Configuration 62
- Configuring Port Mirroring 69
- Address Table Settings 70
- Setting Static Addresses 71
- Displaying the Address Table 72
- Changing the Aging Time 74
- LGORITHM 77
- Information 83
- VLAN Configuration 84
- Assigning Ports to VLANs 85
- Displaying Current VLANs 89
- Command Attributes (CLI) 90
- Creating VLANs 91
- Configuring Private VLANs 100
- ONFIGURING 101
- Command Attributes 102
- Associating Community VLANs 104
- ONFIGURATION 109
- Setting the Queue Mode 110
- Port Trunk Configuration 111
- Command Usage 112
- Configuring SNMP 114
- Multicast Configuration 118
- Configuring IGMP Parameters 119
- ULTICAST 121
- Command Attribute 124
- Showing Port Statistics 128
- TATISTICS 129
- Rate Limit Configuration 130
- UTHENTICATION 133
- Statistical Values 139
- NTERFACE 143
- Telnet Connection 144
- Entering Commands 146
- Command Completion 147
- Getting Help on Commands 147
- Understanding Command Modes 149
- Exec Commands 149
- Configuration Commands 150
- Command Groups 152
- General Commands 155
- Console#disable 157
- Console> 157
- Console#configure 157
- Console(config)# 157
- Console#!2 159
- Console#config 159
- Console#reload 159
- Flash/File Commands 161
- Command Function Mode Page 162
- Console#delete test2.cfg 165
- Console# 165
- System Management Commands 168
- Example 175
- Related Commands 175
- Authentication Commands 180
- Port Authentication Commands 186
- SNMP Commands 196
- IGMP Snooping Commands 203
- 1 224.1.2.3 Eth1/11 IGMP 209
- Line Commands 210
- Console(config)#line console 211
- Console(config-line)# 211
- IP Commands 221
- Console(config-if)# 223
- REVENTION 229
- Interface Commands 230
- Default Setting 235
- Rate Limit Commands 246
- Address Table Commands 248
- Spanning Tree Commands 253
- Console(config)#spanning-tree 255
- VLAN Commands 263
- Private VLAN Commands 274
- Console(config)#vlan database 277
- XTENSION 283
- Priority Commands 288
- Mirror Port Commands 290
- Port Trunking Commands 292
- ROUBLESHOOTING 297
- Restoring Switch Defaults 302
- ESTORING 303
- Glossary-1 305
- Glossary-2 306
- Glossary-3 307
- Glossary-4 308
- Glossary-5 309
- Glossary-6 310
- Glossary-7 311
- Glossary-8 312
- SSIGNMENTS 313
- , 3-68, 3-86 316
Relacionado con productos y manuales para Monitores Smc-networks TIGERSWITCH 10/100
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales