Smc-networks TIGERSWITCH 10/100 Manual de usuario descargar pdf (Pagina 25)

ASIC

ONFIGURATION

1-11

The default strings are:

• public - with read-only access. Authorized management

stations are only able to retrieve MIB objects.

• private - with read-write access. Authorized management

stations are able to both retrieve and modify MIB objects.

Note: If you do not intend to utilize SNMP, it is recommended

that you delete both of the default community strings. If

there are no community strings, then SNMP management

access to the switch is disabled.

To prevent unauthorized access to the switch via SNMP, it is

recommended that you change the default community strings.

To configure a community string, complete the following steps:

1. From the Privileged Exec level global configuration mode

prompt, type “snmp-server community string mode,” where

“string” is the community access string and “mode” is rw

(read/write) or ro (read only). Press <Enter>.

2. To remove an existing string, simply type “no snmp-server

community string,” where “string” is the community access

string to remove. Press <Enter>.

Console(config)#snmp-server community abc rw

Console(config)#snmp-server community private

Console(config)#

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 317 318

Sin comentarios

Smc-networks TIGERSWITCH 10/100 Manual de usuario Pagina 25