Smc-networks TIGERSWITCH 10/100 Manual de usuario Pagina 237
- Pagina / 318
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
I
NTERFACE
C
OMMANDS
3-95
Command Usage
• Flow control can eliminate frame loss by “blocking” traffic from
end stations or segments connected directly to the switch when
its buffers fill. When enabled, back pressure is used for
half-duplex operation and IEEE 802.3x for full-duplex
operation.
• To force flow control on or off (with the flowcontrol or no
flowcontrol command), use the no negotiation command to
disable auto-negotiation on the selected interface.
• When using the negotiation command to enable
auto-negotiation, the optimal settings will be determined by the
capabilities command. To enable flow control under
auto-negotiation, “flowcontrol” must be included in the
capabilities list for any port
• Avoid using flow control on a port connected to a hub unless
it is actually required to solve a problem. Otherwise back
pressure jamming signals may degrade overall performance for
the segment attached to the hub.
Example
The following example enables flow control on port 5.
Related Commands
negotiation (3-92)
capabilities (flowcontrol, symmetric) (3-93)
Console(config)#interface ethernet 1/5
Console(config-if)#flowcontrol
Console(config-if)#no negotiation
Console(config-if)#
- TigerSwitch 10/100 1
- Management Guide 3
- ANAGEMENT 15
- ONNECTING 17
- Remote Connections 18
- Basic Configuration 19
- Setting Passwords 20
- Setting an IP Address 21
- Saving Configuration Settings 26
- Managing System Files 27
- System Defaults 28
- AVIGATING 35
- Panel Display 36
- Main Menu 37
- Setting the IP Address 43
- Manual Configuration 45
- Using DHCP/BOOTP 45
- Managing Firmware 52
- Resetting the System 56
- (Global Setting) 59
- Enabling or Disabling GVRP 59
- Versions 60
- ISPLAYING 61
- Port Configuration 62
- Configuring Port Mirroring 69
- Address Table Settings 70
- Setting Static Addresses 71
- Displaying the Address Table 72
- Changing the Aging Time 74
- LGORITHM 77
- Information 83
- VLAN Configuration 84
- Assigning Ports to VLANs 85
- Displaying Current VLANs 89
- Command Attributes (CLI) 90
- Creating VLANs 91
- Configuring Private VLANs 100
- ONFIGURING 101
- Command Attributes 102
- Associating Community VLANs 104
- ONFIGURATION 109
- Setting the Queue Mode 110
- Port Trunk Configuration 111
- Command Usage 112
- Configuring SNMP 114
- Multicast Configuration 118
- Configuring IGMP Parameters 119
- ULTICAST 121
- Command Attribute 124
- Showing Port Statistics 128
- TATISTICS 129
- Rate Limit Configuration 130
- UTHENTICATION 133
- Statistical Values 139
- NTERFACE 143
- Telnet Connection 144
- Entering Commands 146
- Command Completion 147
- Getting Help on Commands 147
- Understanding Command Modes 149
- Exec Commands 149
- Configuration Commands 150
- Command Groups 152
- General Commands 155
- Console#disable 157
- Console> 157
- Console#configure 157
- Console(config)# 157
- Console#!2 159
- Console#config 159
- Console#reload 159
- Flash/File Commands 161
- Command Function Mode Page 162
- Console#delete test2.cfg 165
- Console# 165
- System Management Commands 168
- Example 175
- Related Commands 175
- Authentication Commands 180
- Port Authentication Commands 186
- SNMP Commands 196
- IGMP Snooping Commands 203
- 1 224.1.2.3 Eth1/11 IGMP 209
- Line Commands 210
- Console(config)#line console 211
- Console(config-line)# 211
- IP Commands 221
- Console(config-if)# 223
- REVENTION 229
- Interface Commands 230
- Default Setting 235
- Rate Limit Commands 246
- Address Table Commands 248
- Spanning Tree Commands 253
- Console(config)#spanning-tree 255
- VLAN Commands 263
- Private VLAN Commands 274
- Console(config)#vlan database 277
- XTENSION 283
- Priority Commands 288
- Mirror Port Commands 290
- Port Trunking Commands 292
- ROUBLESHOOTING 297
- Restoring Switch Defaults 302
- ESTORING 303
- Glossary-1 305
- Glossary-2 306
- Glossary-3 307
- Glossary-4 308
- Glossary-5 309
- Glossary-6 310
- Glossary-7 311
- Glossary-8 312
- SSIGNMENTS 313
- , 3-68, 3-86 316
Relacionado con productos y manuales para Monitores Smc-networks TIGERSWITCH 10/100
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales