Smc-networks TIGERSWITCH 10/100 Manual de usuario descargar pdf (Pagina 132)

ONFIGURING

THE

WITCH

2-100

Web - Click Rate Limit, Input/Output Rate Limit Port/Trunk

Configuration. Enable the Rate Limit Status for the required

interfaces, set the Rate Limit to one of the options shown in the

preceding table, and click Apply.

CLI - This example sets the rate limit for input and output traffic

passing through port 3 to approximately 3% (i.e., 3.12 Mbps for a

100 Mbps link), and the rate limit for traffic crossing port 4 to 6%

(i.e., 6.25 Mbps for a 100 Mbps link).

Configuring 802.1x Port Authentication

Network switches can provide open and easy access to network

resources by simply attaching a client PC. Although this automatic

configuration and access is a desirable feature, it also allows

unauthorized personnel to easily intrude and possibly gain access

to sensitive network data.

Console(config)#interface ethernet 1/3 3-89

Console(config-if)#rate-limit input percent 3 3-105

Console(config-if)#rate-limit output percent 3

Console(config-if)#exit

Console(config)#interface ethernet 1/4

Console(config-if)#rate-limit input percent 6 3-105

Console(config-if)#rate-limit output percent 6

Console(config-if)#

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 317 318

Sin comentarios

Smc-networks TIGERSWITCH 10/100 Manual de usuario Pagina 132