SMC Networks SMC8624/48T Manual de usuario descargar pdf (Pagina 97)

100

101

SER

UTHENTICATION

3-49

To add new VLAN members at a later time, you can manually add secure

addresses with the Static Address Table (page 3-112), or turn off port

security to reenable the learning function long enough for new VLAN

members

to be registered. Learning may then be disabled again, if desired,

for security.

Command Usage

• A secure port has the following restrictions:

- Cannot use port monitoring.

- Cannot be a multi-VLAN port.

- It cannot be used as a member of a static or dynamic trunk.

- It should not be connected to a network interconnection device.

• If a port is disabled (shut down) due to a security violation, it must be

manually re-enabled from the Port/Port Configuration page

(page 3-84).

Command Attributes

•Port – Port number.

•Name – Descriptive text (page 4-168).

• Action – Indicates the action to be taken when a port security violation

is detected:

- None: No action should be taken. (This is the default.)

- Trap: Send an SNMP trap message.

- Shutdown: Disable the port.

- Trap and Shutdown: Send an SNMP trap message and disable the

port.

• Security Status – Enables or disables port security on the port.

(Default: Disabled)

• Max MAC Count – The maximum number of MAC addresses that

can be learned on a port. (Range: 0 - 20)

• Trunk – Trunk number if port is a member (page 3-88 and 3-89).

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 555 556

Comentarios a estos manuales

Sin comentarios

SMC Networks SMC8624/48T Manual de usuario Pagina 97

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red SMC Networks SMC8624/48T