SMC Networks SMC8624/48T Manual de usuario Pagina 354

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 556
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 353
C
OMMAND
L
INE
I
NTERFACE
4-110
Command Mode
Global Configuration
Example
dot1x timeout re-authperiod
This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
Default
3600 seconds
Command Mode
Global Configuration
Example
dot1x timeout tx-period
This command sets the time that the switch waits during an authentication
session before re-transmitting an EAP packet. Use the no form to reset to
the default value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds - The number of seconds. (Range: 1-65535)
Console(config)#dot1x timeout quiet-period 350
Console(config)#
Console(config)#dot1x timeout re-authperiod 300
Console(config)#
Vista de pagina 353
1 2 ... 349 350 351 352 353 354 355 356 357 358 359 ... 555 556

Comentarios a estos manuales

Sin comentarios