SMC Networks SMC8624/48T Manual de usuario Pagina 482

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 556
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 481
C
OMMAND
L
INE
I
NTERFACE
4-237
switchport acceptable-frame-types
This command configures the acceptable frame types for a port. Use the
no form to restore the default.
Syntax
switchport acceptable-frame-types {all | tagged}
no switchport acceptable-frame-types
all - The port accepts all frames, tagged or untagged.
tagged - The port only receives tagged frames.
Default Setting
All frame types
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
When set to receive all frame types, any received frames that are
untagged are assigned to the default VLAN.
Example
The following example shows how to restrict the traffic received on port 1
to tagged frames:
Related Commands
switchport mode (4 -236)
Console(config)#interface ethernet 1/1
Console(config-if)#switchport acceptable-frame-types tagged
Console(config-if)#
Vista de pagina 481
1 2 ... 477 478 479 480 481 482 483 484 485 486 487 ... 555 556

Comentarios a estos manuales

Sin comentarios