SMC Networks SMC8624/48T Manual de usuario Pagina 420

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 556
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 419
C
OMMAND
L
INE
I
NTERFACE
4-175
Default Setting
sfp-preferred-auto
Command Mode
Interface Configuration (Ethernet)
Example
This forces the switch to use the built-in RJ-45 port for the combination
port 21.
shutdown
This command disables an interface. To restart a disabled interface, use the
no form.
Syntax
[no] shutdown
Default Setting
All interfaces are enabled.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command allows you to disable a port due to abnormal behavior
(e.g., excessive collisions), and then reenable it after the problem has
been resolved. You may also want to disable a port for security reasons.
Example
The following example disables port 5.
Console(config)#interface ethernet 1/21
Console(config-if)#combo-forced-mode copper-forced
Console(config-if)#
Console(config)#interface ethernet 1/5
Console(config-if)#shutdown
Console(config-if)#
Vista de pagina 419
1 2 ... 415 416 417 418 419 420 421 422 423 424 425 ... 555 556

Comentarios a estos manuales

Sin comentarios