SMC Networks SMC8624/48T Manual de usuario Pagina 209

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 556
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 208
VLAN C
ONFIGURATION
3-161
Web Click VLAN, Protocol VLAN, Configuration. Enter a protocol
group ID, frame type and protocol type, then click Apply.
Figure 3-68. Protocil VLAN Configuration
CLI – The following creates protocol group 1, and then specifies Ethernet
frames with IP and ARP protocol types.
Mapping Protocols to VLANs
Map a protocol group to a VLAN for each interface that will participate in
the group.
Command Usage
When creating a protocol-based VLAN, only assign interfaces using
this configuration screen. If you assign interfaces using any of the other
VLAN commands such as VLAN Static Table (page 3-151) or VLAN
Static Membership (page 3-153), these interfaces will admit traffic of
any protocol type into the associated VLAN.
Console(config)#protocol-vlan protocol-group 1
add frame-type ethernet protocol-type ip 3-244
Console(config)#protocol-vlan protocol-group 1
add frame-type ethernet protocol-type arp
Console(config)#
Vista de pagina 208
1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 555 556

Comentarios a estos manuales

Sin comentarios