SMC Networks SMC6824M Manual de usuario Pagina 591

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 608
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 590
B-1
A
PPENDIX
B
T
ROUBLESHOOTING
Problems Accessing the Management Interface
Table B-1 Troubleshooting Chart
Symptom Action
Cannot connect using
Telnet, web browser,
or SNMP software
Be sure the switch is powered up.
Check network cabling between the management station and the
switch.
Check that you have a valid network connection to the switch and
that the port you are using has not been disabled.
Be sure you have configured the VLAN interface through which
the management station is connected with a valid IP address,
subnet mask and default gateway.
Be sure the management station has an IP address in the same
subnet as the switch’s IP interface to which it is connected.
If you are trying to connect to the switch via the IP address for a
tagged VLAN group, your management station, and the ports
connecting intermediate switches in the network, must be
configured with the appropriate tag.
If you cannot connect using Telnet, you may have exceeded the
maximum number of concurrent Telnet/SSH sessions permitted.
Try connecting again at a later time.
Vista de pagina 590
1 2 ... 586 587 588 589 590 591 592 593 594 595 596 ... 607 608

Comentarios a estos manuales

Sin comentarios