SMC Networks SMC6824M Manual de usuario Pagina 165

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 608
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 164
A
CCESS
C
ONTROL
L
ISTS
3-109
Source/Destination Subnet Mask Subnet mask for source or
destination address. (See the description for SubMask on page 3-100.)
Protocol Bitmask – Check the protocol field.
Service Type Mask – Check the rule for the specified priority type.
(Options: Precedence, TOS, DSCP; Default: TOS)
Source/Destination Port Bitmask – Protocol port of rule must match
this bitmask. (Range: 0-65535)
Control Code Bitmask – Control flags of rule must match this bitmask.
(Range: 0-63)
Web – Configure the mask to match the required rules in the IP ingress or
egress ACLs. Set the mask to check for any source or destination address, a
specific host address, or an address range. Include other criteria to search
for in the rules, such as a protocol type or one of the service types. Or use
a bitmask to search for specific protocol port(s) or TCP control code(s).
Then click Add.
Figure 3-47 Configuring an IP based ACL
Vista de pagina 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 607 608

Comentarios a estos manuales

Sin comentarios