SMC Networks SMC6824M Manual de usuario Pagina 206

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 608
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 205
C
ONFIGURING
THE
S
WITCH
3-150
If a device is connected to a critical or high-priority port and causes the
switch to exceed its budget, port power is turned on, but the switch drops
power to one or more lower-priority ports.
Note: Power is dropped from low-priority ports in sequence starting
from port number 1.
Command Attributes
Port – The port number on the switch.
Admin Status – Enables PoE power on the port. Power is automatically
supplied when a device is detected on the port, providing that the power
demanded does not exceed the switch or port power budget.
(Default: Enabled)
Priority – Sets the power priority for the port. (Options: low, high, or
critical; Default: low)
Power Allocation Sets the power budget for the port.
(Range: 3000- 15400 milliwatts; Default: 15400 milliwatts)
Web – Click PoE, Power Port Configuration. Enable PoE power on
selected ports, set the priority and the power budget, and then click Apply.
Figure 3-65 Configuring Port PoE Power
Vista de pagina 205
1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 607 608

Comentarios a estos manuales

Sin comentarios