SMC Networks SMC6824M Manual de usuario Pagina 164

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 608
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 163
C
ONFIGURING
THE
S
WITCH
3-108
Web – Click Security, ACL, Mask Configuration. Click Edit for one of the
basic mask types to open the configuration page.
Figure 3-46 Choosing ACL Types
CLI – This example creates an IP ingress mask, and then adds two rules.
Each rule is checked in order of precedence to look for a match in the
ACL entries. The first entry matching a mask is applied to the inbound
packet.
Configuring an IP ACL Mask
This mask defines the fields to check in the IP header.
Command Usage
Masks that include an entry for a Layer 4 protocol source port or
destination port can only be applied to packets with a header length of
exactly five bytes.
Command Attributes
Source/Destination Address Type – Specifies the source or
destination IP address. Use “Any” to match any address, “Host” to
specify a host address (not a subnet), or “IP” to specify a range of
addresses. (Options: Any, Host, IP; Default: Any)
Console(config)#access-list ip mask-precedence in 4-129
Console(config-ip-mask-acl)#mask host any 4-130
Console(config-ip-mask-acl)#mask 255.255.255.0 any
Console(config-ip-mask-acl)#
Vista de pagina 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 607 608

Comentarios a estos manuales

Sin comentarios