SMC Networks SMC6824M Manual de usuario Pagina 544

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 608
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 543
GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
4-252
unless you are experiencing difficulties with GMRP or GVRP
registration/deregistration.
Timer values are applied to GVRP for all the ports on all VLANs.
Timer values must meet the following restrictions:
- leave >= (2 x join)
- leaveall > leave
Note: Set GVRP timers on all Layer 2 devices connected in the same
network to the same values. Otherwise, GVRP may not operate
successfully.
Example
Related Commands
show garp timer (4-252)
show garp timer
This command shows the GARP timers for the selected interface.
Syntax
show garp timer [interface]
interface
ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-6)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#garp timer join 100
Console(config-if)#
Vista de pagina 543
1 2 ... 539 540 541 542 543 544 545 546 547 548 549 ... 607 608

Comentarios a estos manuales

Sin comentarios