SMC Networks SMC8606T Manual de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
C
ONSOLE
I
NTERFACE
2-49
Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable
broadcast storm control for any port on the switch, as shown
below.
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Broadcast Storm Control Configuration >
Broadcast control on all ports : [Enable] [Disable]
Port Threshold Broadcast Control
-------------------------------------------------------
1 500 ENABLED
2 500 ENABLED
3 500 ENABLED
4 500 ENABLED
5 500 ENABLED
6 500 ENABLED
7 500 ENABLED
8 500 ENABLED
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter Description
Broadcast control on
all ports
Allows you to enable/disable broadcast storm
control for all ports on the switch.
Threshold The packet-per-second threshold for broadcast
packets on the port.
(Default is 500 pps.)
Broadcast Control Enables/disables broadcast control for the port.
When enabled, the switch will employ a
broadcast-control mechanism if the
packet-per-second threshold is exceeded. This
mechanism limits the amount of broadcasts passed
by the port to half of the received
packet-per-second count. The control mechanism
remains in effect until the number of received
broadcasts falls back below the packet-per-second
threshold. (Default is Enabled.)
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 181 182

Comentarios a estos manuales

Sin comentarios