SMC Networks SMC8606T Manual de usuario descargar pdf (Pagina 109)

NTERFACE

3-13

SNMP Configuration

Use the SNMP Configuration screen to display and modify

parameters for the Simple Network Management Protocol (SNMP).

The switch includes an SNMP agent which monitors the status of its

hardware, as well as the traffic passing through its ports. A computer

attached to the network, called a Network Management Station

(NMS), can be used to access this information. Access rights to the

switch are controlled by community strings. To communicate with

the switch, the NMS must first submit a valid community string for

authentication. The options for configuring community strings and

related trap functions are described in the following figures and table.

SNMP Community

The following figure and table describe how to configure the

community strings authorized for management access. Up to 5

community names may be entered.

Parameter Description

SNMP

Community

Capability

Up to 5 community strings may be used.

Add/Remove Add/remove strings from the active list.

Community String A community entry authorized for management

access.

(The maximum string length is 19 characters).

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 181 182

Sin comentarios

SMC Networks SMC8606T Manual de usuario Pagina 109