SMC Networks SMC8606T Manual de usuario descargar pdf (Pagina 167)

ROUBLESHOOTING

A-3

3. Change your baud rate to 115200 bps, and press Enter to enable

download mode. From the terminal emulation program, select

the file you want to download, set the protocol to XModem, and

then initialize downloading.

Notes: 1. If you use Windows HyperTerminal, disconnect and

reconnect to enable the new baud rate.

2. The download file should be an SMC8606T binary file

from SMC; otherwise the agent will not accept it. The file

naming convention is:

Runtime program: Agent-Vx.yz,

POST program: Boot-Vx.yx, and

Mainboard program: 8051-Vx.yz

4. After the file has been downloaded, the console screen will display

information similar to that shown below. Press “s” to start the

management interface, change the baud rate back to 19200, and

press Enter. The Logon screen will then appear.

For details on managing the switch, refer to Chapter 2 for

information on the out-of-band console interface, or Chapter 3 for

information on the Web interface.

XModem Download to DRAM buffer area 0x00200000: ... SUCCESS !

Verifying image in DRAM download buffer 0x00200000... SUCCESS !

Update FlashROM Image at 0x02880000 ... SUCCESS !

(D)ownload another Image or (S)tart Application: [S] s

Change Baud Rate to 19200 and Press <ENTER>.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 181 182

Sin comentarios

SMC Networks SMC8606T Manual de usuario Pagina 167