SMC Networks SMC8606T Manual de usuario descargar pdf (Pagina 28)

ONSOLE

NTERFACE

2-12

IP Configuration

Use the IP Configuration screen to set the bootup option, or

configure the switch’s IP parameters. The screen shown below is

described in the following table.

SMC TigerSwitch 1000 Local Management -- SMC8606T

< IP Configuration >

Interface Type : Ethernet

IP Address : 10.2.13.29

Netmask : 255.255.255.0

Default Gateway :

IP State : USER-CONFIG

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter Default Description

Interface

Type

Ethernet Indicates IP over Ethernet.

IP Address 10.1.0.1 IP address of the switch you are

managing when accessing it over the

network. The switch supports SNMP over

UDP/IP transport protocol. In this

environment, all systems on the Internet,

such as network interconnection devices

and any PC accessing the switch must

have an IP address.

Valid IP addresses consist of four decimal

numbers, of 0 to 255, separated by

periods. Anything outside of this format

will not be accepted by the configuration

program.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 181 182

Sin comentarios

SMC Networks SMC8606T Manual de usuario Pagina 28