SMC Networks SMC8612XL3 Manual de usuario Pagina 723

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 846
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 722
IP R
OUTING
C
OMMANDS
-141
Example
This example sets an authentication password of “small” to verify
incoming routing messages and to tag outgoing routing messages.
Related Commands
ip rip authentication mode (3-141)
ip rip authentication mode
Use this command to specify the type of authentication that can be used
on an interface. Note that the current firmware version only supports a
simple password. Use the no form to restore the default value.
Syntax
ip rip authentication mode {text}
no ip rip authentication mode
text - Indicates that a simple password will be used.
Command Mode
Interface Configuration (VLAN)
Default Setting
No authentication
Command Usage
The password to be used for authentication is specified in the ip rip
authentication key command (page 3-140).
This command requires the interface to exchange routing information
with other routers based on an authorized password. (Note that this
command only applies to RIPv2.)
For authentication to function properly, both the sending and receiving
interface must be configured with the same password or authentication
key.
Console(config)#interface vlan 1
Console(config-if)#ip rip authentication key small
Console(config-if)#
Vista de pagina 722
1 2 ... 718 719 720 721 722 723 724 725 726 727 728 ... 845 846

Comentarios a estos manuales

Sin comentarios