SMC Networks SMC8612XL3 Manual de usuario Pagina 711

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 846
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 710
IP R
OUTING
C
OMMANDS
-129
clear ip route
Use this command to remove dynamically learned entries from the IP
routing table.
Syntax
clear ip route {network [netmask] | *}
network – Network or subnet address.
netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
* – Removes all dynamic routing table entries.
Command Mode
Privileged Exec
Command Usage
This command only clears dynamically learned routes.
•Use the no ip address command to remove a local interface.
•Use the no ip route command to remove a static route.
Example
show ip route
Use this command to display information in the IP routing table.
Syntax
show ip route [config | address [netmask]]
config – Displays all static routing entries.
address – IP address of the destination network, subnetwork or host
for which routing information is to be displayed.
netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
Command Mode
Privileged Exec
Console#clear ip route 10.1.5.0
Console#
Vista de pagina 710
1 2 ... 706 707 708 709 710 711 712 713 714 715 716 ... 845 846

Comentarios a estos manuales

Sin comentarios