SMC Networks SMC8612XL3 Manual de usuario Pagina 153
- Pagina / 846
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
P
ORT
C
ONFIGURATION
3-99
CLI – This example creates trunk 2 with ports 9 and 10. Just connect
these ports to two static trunk ports on another switch to form a trunk.
Enabling LACP on Selected Ports
Command Usage
• To avoid creating a loop in the
network, be sure you enable LACP
before connecting the ports, and also
disconnect the ports before disabling
LACP.
• If the target switch has also enabled
LACP on the connected ports, the
trunk will be activated automatically.
• A trunk formed with another switch using LACP will automatically be
Console(config)#interface port-channel 23-1
Console(config-if)#exit
Console(config)#interface ethernet 1/93-1
Console(config-if)#channel-group 13-21
Console(config-if)#exit
Console(config)#interface ethernet 1/10
Console(config-if)#channel-group 1
Console(config-if)#end
Console#show interfaces status port-channel 13-11
Information of Trunk 1
Basic information:
Port type: 1000T
Mac address: 00-00-E8-AA-AA-01
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full, 1000full,
Flow control: Disabled
Port security: Disabled
Max MAC count: 0
Port security action: None
Combo forced mode: None
Current status:
Created by: User
Link status: Down
Operation speed-duplex: 1000full
Flow control type: None
Member Ports: Eth1/9, Eth1/10,
Console#
active
links
}
}
dynamically
enabled
configured
members
backup
link
- TigerSwitch 10/100/1000 1
- Management Guide 3
- NTRODUCTION 27
- ESCRIPTION 29
- System Defaults 36
- ONNECTING 43
- Basic Configuration 45
- Setting Passwords 46
- Setting an IP Address 47
- Dynamic Configuration 48
- Community Strings 50
- Trap Receivers 51
- Saving Configuration Settings 52
- Managing System Files 53
- AVIGATING 57
- Manual Configuration 75
- Using DHCP/BOOTP 76
- Managing Firmware 78
- Configuring Event Logging 82
- Remote Log Configuration 84
- Displaying Log Messages 86
- Resetting the System 87
- Setting the System Clock 87
- Configuring SNTP 88
- Setting the Time Zone 89
- for your time zone 90
- User Authentication 96
- * CLI only 97
- ONFIGURING 100
- UTHENTICATION 101
- Configuring HTTPS 102
- Command Attributes 103
- Configuring the Secure Shell 104
- Command Usage 105
- Generating the Host Key Pair 107
- Configuring the SSH Server 109
- Configuring Port Security 110
- Displaying 802.1x Statistics 121
- Parameter Description 122
- Filtering Management Access 123
- Access Control Lists 126
- Setting the ACL Name and Type 127
- Configuring a Standard IP ACL 128
- Configuring a MAC ACL 132
- Configuring ACL Masks 135
- Configuring an IP ACL Mask 136
- Configuring a MAC ACL Mask 139
- Port Configuration 143
- 1: Port Information only 144
- 2: Trunk Information only 144
- ONFIGURATION 145
- Current status: 145
- Creating Trunk Groups 150
- Configuring LACP Parameters 155
- Displaying LACP Port Counters 158
- Configuring Port Mirroring 167
- Configuring Rate Limits 169
- Showing Port Statistics 170
- Statistical Values 171
- Address Table Settings 176
- Displaying the Address Table 178
- Changing the Aging Time 179
- LGORITHM 181
- Field Attributes 181
- Displaying Interface Settings 190
- VLAN Configuration 204
- Assigning Ports to VLANs 205
- Displaying Current VLANs 209
- Command Attributes (CLI) 210
- Creating VLANs 212
- Configuring Private VLANs 221
- Configuring Protocol Groups 223
- Mapping Protocols to VLANs 224
- Mapping CoS Values to ACLs 240
- 01234567 241
- 12034567 241
- Multicast Filtering 244
- IGMP Protocol 245
- ULTICAST 247
- ILTERING 247
- Command Attribute 252
- L3 - network core 255
- Displaying the DNS Cache 266
- Configuring Address Pools 271
- Examples 274
- Displaying Address Bindings 277
- Configuring Router Redundancy 279
- Master Router 280
- Backup Router 280
- Router 1 280
- Router 2 280
- Configuring VRRP Groups 281
- EDUNDANCY 283
- Hot Standby Router Protocol 291
- Configuring HSRP Groups 292
- IP Routing 300
- IP Switching 301
- Routing Path Management 303
- Routing Protocols 303
- Non-IP Protocol Routing 304
- Address Resolution Protocol 309
- Proxy ARP 310
- Basic ARP Configuration 310
- Displaying Local ARP Entries 314
- Displaying ARP Statistics 315
- IP Statistics 317
- ICMP Statistics 319
- UDP Statistics 321
- TCP Statistics 322
- Configuring Static Routes 323
- Displaying the Routing Table 325
- Autonomous System A 339
- Autonomous System B 339
- General Information – 341
- Default Route Information – 342
- 1. These items are read only 343
- Configuring OSPF Areas 345
- Configuring OSPF Interfaces 351
- Configuring Virtual Links 357
- Console(config-router)# 359
- Configuring NSSA Settings 365
- * These items are read only 369
- Multicast Routing 373
- Configuring DVMRP 377
- NTERFACE 397
- Telnet Connection 398
- Entering Commands 400
- Command Completion 401
- Getting Help on Commands 401
- Showing Commands 402
- Configuration Commands 405
- Privileged Exec mode 407
- Command Line Processing 408
- Command Groups 409
- Line Commands 411
- Console(config-line)# 415
- Console#disconnect 1 421
- Console# 421
- General Commands 423
- Console#disable 425
- Console> 425
- Console#configure 425
- Console(config)# 425
- Console#reload 427
- Console(config-if)#end 427
- System Management Commands 429
- Device Designation Commands 430
- User Access Commands 431
- ANAGEMENT 433
- IP Filter Commands 434
- Web Server Commands 437
- Secure Shell Commands 441
- Command Mode 451
- Privileged Exec 451
- Example 451
- Event Logging Commands 454
- SMTP Alert Commands 461
- Time Commands 466
- Command Function Mode Page 467
- [no] sntp broadcast client 470
- System Status Commands 474
- Related Commands 477
- Frame Size Commands 480
- Flash/File Commands 481
- Console#delete test2.cfg 485
- Authentication Commands 488
- Authentication Sequence 489
- RADIUS Client 490
- TACACS+ Client 494
- Port Security Commands 497
- 802.1x Port Authentication 500
- Access Control List Commands 509
- Command Groups Function Page 511
- Console(config-std-acl)# 513
- IP ingress mask ACL: 523
- mask host any 523
- mask 255.255.255.0 any 523
- Console(config-if)# 527
- [no] access-list mac acl_name 529
- Console#show mac access-list 533
- MAC access-list jerry: 533
- Console#show mac access-group 539
- Interface ethernet 1/5 539
- MAC access-list M5 out 539
- ACL Information 542
- SNMP Commands 543
- DHCP Commands 551
- DHCP Relay 553
- DHCP Server 556
- Console(config)#service dhcp 557
- Console(config-dhcp)# 559
- (Range: 1-32 characters) 561
- DHCP Pool Configuration 561
- DNS Commands 572
- Field Description 580
- Interface Commands 583
- Mirror Port Commands 598
- Rate Limit Commands 600
- Link Aggregation Commands 602
- GGREGATION 603
- Console(config-if)#exit 604
- (Range: 0-65535) 608
- Address Table Commands 615
- Aging time: 300 sec 619
- Spanning Tree Commands 620
- Console(config)#spanning-tree 621
- VLAN Commands 636
- Console(config)#vlan database 637
- Console(config-vlan)# 637
- Configuring VLAN Interfaces 639
- Displaying VLAN Information 646
- XTENSION 655
- Priority Commands 659
- Priority Commands (Layer 2) 660
- 20134567 664
- Information of Eth 1/1 667
- Console(config)#map ip port 668
- IP Precedence Val 671
- CoS Value 01234567 671
- Console(config)#map ip dscp 672
- 38, 40, 42 5 673
- 46, 56 7 673
- Multicast Filtering Commands 677
- IGMP Snooping Commands 678
- IGMP Commands (Layer 3) 689
- IP Interface Commands 698
- Console#clear arp-cache 706
- IP Routing Commands 708
- Global Routing Configuration 709
- Console(config)#ip routing 710
- Console(config)#router rip 714
- IP address of the interface 725
- Console(config)#router ospf 729
- (Range: 0-65535 seconds) 732
- Console#show ip ospf neighbor 764
- 10.1.0.0/255.255.0.0 765
- Multicast Routing Commands 766
- Normal Exec, Privileged Exec 783
- Router Redundancy Commands 793
- Console#show vrrp brief 802
- PECIFICATIONS 821
- TANDARDS 823
- TCP MIB (RFC 2013) 825
- Trap (RFC 1215) 825
- UDP MIB (RFC 2012) 825
- VRRP MIB (RFC 2787) 825
- ROUBLESHOOTING 827
- Glossary-1 829
- Glossary-2 830
- Glossary-3 831
- Glossary-4 832
- Glossary-5 833
- Glossary-6 834
- Glossary-7 835
- Glossary-8 836
- Glossary-9 837
- Glossary-10 838
Relacionado con productos y manuales para Los conmutadores de red SMC Networks SMC8612XL3
(82 paginas)
(34 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales