SMC Networks SMC8612XL3 Manual de usuario descargar pdf (Pagina 424)

Command Mode

Command Usage

• “super” is the default password required to change the command mode

from Normal Exec to Privileged Exec. (To set this password, see the

enable password command on page 3-37.)

• The “#” character is appended to the end of the prompt to indicate

that the system is in privileged access mode.

Related Commands

disable (3-28)

enable password (3-37)

This command returns to Normal Exec mode from privileged mode. In

normal access mode, you can only display basic information on the

switch's configuration or Ethernet statistics. To gain access to all

commands, you must use the privileged mode. See “Understanding

Command Modes” on page 4-8.

Default Setting

Command Mode

Privileged Exec

Command Usage

The “>” character is appended to the end of the prompt to indicate

that the system is in normal access mode.

Console>enable

Password: [privileged level password]

Sin comentarios

SMC Networks SMC8612XL3 Manual de usuario Pagina 424