Smc-networks SMC2552W-G2-17 Manual de usuario descargar pdf (Pagina 234)

Wireless Interface Commands

7-97

channel

This command configures the radio channel through which the access point

communicates with wireless clients.

Syntax

channel <channel | auto>

• channel - Manually sets the radio channel used for communications with

wireless clients. (Range for 802.11b/g: 1 to 11)

• auto - Automatically selects an unoccupied channel (if available).

Otherwise, the lowest channel is selected.

Default Setting

Automatic channel selection

Command Mode

Interface Configuration (Wireless)

Command Usage

• The available channel settings are limited by local regulations, which

determine the number of channels that are available.

• When multiple access points are deployed in the same area, be sure to

choose a channel separated by at least five channels for 802.11b/g. You

can deploy up to three access points for 802.11b/g (e.g., channels 1, 6, 11).

• For most wireless adapters, the channel for wireless clients is automatically

set to the same as that used by the access point to which it is linked.

Example

transmit-power

This command adjusts the power of the radio signals transmitted from the access

point.

Syntax

transmit-power <signal-strength>

signal-strength - Signal strength transmitted from the access point.

(Options: full, half, quarter, eighth, min)

Enterprise AP(if-wireless g)#channel 1

Enterprise AP(if-wireless g)#

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 295 296

Sin comentarios

Smc-networks SMC2552W-G2-17 Manual de usuario Pagina 234