Smc-networks ARM PL241 Manual de usuario Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 110
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
Programmer’s Model
3-12 Copyright © 2006 ARM Limited. All rights reserved. ARM DDI 0389B
3.3.7 SMC Set Opmode Register at 0x1018
This register is the holding register for the smc_opmode0_<n> working registers. The
write-only smc_set_opmode Register cannot be written to in either the Reset or
Low-power state. Figure 3-12 shows the register bit assignments.
Note
Table 3-8 on page 3-13 describes register holding, see Memory manager operation on
page 2-22 for more information.
Figure 3-12 smc_set_opmode Register bit assignments
  
VHWBPZ
VHWBUGBV\QF
VHWBUGBEO
VHWBZUBV\QF
VHWBZUBEO
8QGHILQHG

VHWBEOV
VHWBDGY
VHWBEDD
 
VHWBEXUVWBDOLJQ

Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 109 110

Comentarios a estos manuales

Sin comentarios