SMC Networks ADSL2 Manual de usuario descargar pdf (Pagina 35)

The following table describes the parameters of this page.

Field Description

Current ATM VC Table

This table shows the existed PVCs. It shows the Interface name, channel mode,

VPI/VCI, encapsulation mode, local IP address, remote IP address and other

information. The maximum item of this table is eight.

Click it, the IP Interface-Modify page appears. You can modify the PVCs’

parameters.

VPI

The virtual path between two points in an ATM network, ranging from 0 to

255.

VCI

The virtual channel between two points in an ATM network, ranging from 32

to 65535 (1 to 31 are reserved for known protocols)

Encapsulation

You can choose LLC and VC-Mux.

Channel Mode

You can choose 1483 Bridged, 1483 MER, PPPoE, PPPoA, or 1483 Routed.

Admin Status Select Disable, this PVC is unusable.

Enable NAPT

Select it to enable the NAPT function of the router. If you do not select it and

you want to access the Internet normally, you must add a router on the uplink

equipment. Otherwise, the access to the Internet fails. Normally, it is required

to enable NAPT.

Password The correct password that your ISP has provided to you.

Connection Type

You can choose Continuous, Connect on Demand, or Manual.

Idle Time(min)

If select connect on demand, you need to enter the idle timeout time. Within

the preset minutes, if the router does not detect the flow of the user

continuously, the router automatically disconnects the PPPoE connection.

WAN IP Settings

Type

You can choose Fixed IP or Use DHCP.

If select Fixed IP, you should enter the local IP address, remote IP address

and subnet mask.

32

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 71 72

Sin comentarios

SMC Networks ADSL2 Manual de usuario Pagina 35