SMC Networks ADSL2 Manual de usuario descargar pdf (Pagina 31)

The following table describes the parameters and buttons of this page.

Field Description

SSID TYPE Select the SSID.

Key Length Select 64-bit or 128-bit to use data encryption.

Key Format

If you choose 64-bit, you can choose ASCII (5 characters) or Hex (10

characters).

If you choose 128-bit, you can choose ASCII (13 characters) or Hex (26

characters).

Default Tx Key Select the default encryption key.

Encryption Key 1 to 4

The Encryption keys are used to encrypt the data. Both router and wireless stations

must use the same encryption key for data transmission.

If you choose 64-bit and ASCII (5 characters), enter any 5 ASCII characters.

If you choose 64-bit and Hex (10 characters), enter any 10 hexadecimal

characters.

If you choose 128-bit and ASCII (13 characters), enter any 13 ASCII

characters.

If you choose 128-bit and Hex (26 characters), enter any 26 hexadecimal

characters.

Apply Changes Save the changes of this page.

Close Close this page.

Undo Refresh this page.

3.5.3 Advance Settings

Choose WLAN > Advance Settings. The page shown in the following figure appears. These settings are only for

more technically advanced users who have a sufficient knowledge about wireless LAN. These settings should not

be changed unless you know the effect of the changes on your AP.

28

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Sin comentarios

SMC Networks ADSL2 Manual de usuario Pagina 31