SMC Networks ADSL2 Manual de usuario descargar pdf (Pagina 26)

The following table describes the parameters in this page.

Field Description

DHCP Server

If set to DHCP Server, the router can assign IP addresses, IP default gateway and

DNS Servers to Windows95, Windows NT and other systems that support the DHCP

client.

IP Pool Range It specifies the first and the last of contiguous IP address of the IP address pool.

Show Client

Click it, the Active DHCP Client Table page appears. It shows the assigned IP

address of the clients.

Max Lease Time

The lease time determines the period that the PCs retain the assigned IP addresses

before the IP addresses change.

Domain Name

Enter the domain name if you know. If you leave this blank, the domain name

obtained by DHCP from the ISP is used. You must enter host name (system name) on

each individual PC. The domain name can be assigned from the router through the

DHCP server.

Gateway Address Enter the IP default gateway of the IP address pool.

MAC-based Assignment

Click it, the Static IP Assignment Table page appears. It allows you assign IP

addresses on the LAN to specify individual PCs based on their MAC address.

Click Show Client in the DHCP Server Setup page. The page shown in the following figure appears. In this page,

you can view the IP address assigned to each DHCP client.

The following table describes the parameters and buttons in this page.

Field

Description

IP Address It displays the IP address relative to the MAC address.

MAC Address

It displays the MAC address of the PC.

Each Ethernet device has a unique MAC address. The MAC address is assigned

at the factory and it consists of six pairs of hexadecimal character, for example,

00-A0-C5-00-02-12.

Time Expired (s) It shows the lease time. The lease time determines the period that the PCs retain

23

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Sin comentarios

SMC Networks ADSL2 Manual de usuario Pagina 26