SMC Networks TigerAccess SMC7816M Manual de usuario descargar pdf (Pagina 576)

UTHENTICATION

dot1x max-req

This command sets the maximum number of times the switch port will

retransmit an EAP request/identity packet to the client before it times out

the authentication session. Use the no form to restore the default.

dot1x max-req count

no dot1x max-req

count – The maximum number of requests (Range: 1-10)

Command Mode

Interface Configuration

dot1x port-control

This command sets the dot1x mode on a port interface. Use the no form

to restore the default.

dot1x port-control {auto | force-authorized | force-unauthorized}

no dot1x port-control

• auto – Requires a dot1x-aware connected client to be authorized by

the RADIUS server. Clients that are not dot1x-aware will be denied

• force-authorized – Configures the port to grant access to all clients,

either dot1x-aware or otherwise.

• force-unauthorized – Configures the port to deny access to all

clients, either dot1x-aware or otherwise.

Console(config)#interface eth 1/2

Console(config-if)#dot1x max-req 2

Console(config-if)#

Sin comentarios

SMC Networks TigerAccess SMC7816M Manual de usuario Pagina 576