SMC Networks TigerAccess SMC7816M Manual de usuario descargar pdf (Pagina 182)

• Max MAC Count – The maximum number of MAC addresses that can

be learned on a port. (Range: 0 - 1024, where 0 means disabled)

• Trunk – Trunk number if port is a member (page 9-9 and 9-11).

Web – Click Security, Port Security. Set the action to take when an invalid

address is detected on a port, mark the checkbox in the Status column to

enable security for a port, set the maximum number of MAC addresses

allowed on a port, and click Apply.

Figure 7-1 Port Security

CLI – This example selects the target port, sets the port security action to

send a trap and disable the port, specifies a maximum address count, and

then enables port security for the port.

Console(config)#interface ethernet 1/5

Console(config-if)#port security action trap-and-shutdown 23-3

Console(config-if)#port security max-mac-count 20

Console(config-if)#port security

Console(config-if)#

Sin comentarios

SMC Networks TigerAccess SMC7816M Manual de usuario Pagina 182