SMC Networks TigerAccess SMC7816M Manual de usuario descargar pdf (Pagina 538)

100

101

SNMP C

OMMANDS

21-18

snmp-server user

This command adds a user to an SNMP group, restricting the user to a

specific SNMP Read, Write, or Notify View. Use the no form to remove a

user from an SNMP group.

Syntax

snmp-server user username groupname [remote ip-address] {v1 | v2c | v3

[encrypted] [auth {md5 | sha}

auth-password [priv des56 priv-password]]

no snmp-server user username {v1 | v2c | v3 | remote}

• username - Name of user connecting to the SNMP agent.

(Range: 1-32 characters)

•groupname - Name of an SNMP group to which the user is assigned.

(Range: 1-32 characters)

• remote - Specifies an SNMP engine on a remote device.

• ip-address - The Internet address of the remote device.

• v1 | v2c | v3 - Use SNMP version 1, 2c or 3.

• encrypted - Accepts the password as encrypted input.

• auth - Uses SNMPv3 with authentication.

• md5 | sha - Uses MD5 or SHA authentication.

• auth-password - Authentication password. Enter as plain text if the

encrypted option is not used. Otherwise, enter an encrypted

password. (A minimum of eight characters is required.)

• priv des56 - Uses SNMPv3 with privacy with DES56 encryption.

• priv-password - Privacy password. Enter as plain text if the encrypted

option is not used. Otherwise, enter an encrypted password.

Default Setting

None

Command Mode

Global Configuration

1 2 ... 533 534 535 536 537 538 539 540 541 542 543 ... 961 962

Comentarios a estos manuales

Sin comentarios

SMC Networks TigerAccess SMC7816M Manual de usuario Pagina 538

Comentarios a estos manuales