
1-5
INSTALLING THE NETWORK CARD
System Requirements
Before you install the TigerCard 1000 card, check your system for
the following requirements:
A PC and BIOS that support the PCI Local Bus Specification
v2.0 or later
An available bus-mastering 32-bit or 64-bit PCI slot
62.5/125 or 50/125 micron multimode fiber cable (refer to the
tables in Appendix B)
An IEEE 802.3z-compliant Gigabit Ethernet switch or buffered
repeater installed in your network
Comentarios a estos manuales